Timing side bush.
-
Harry44
- Member
- Posts: 280
- Joined: Sat Dec 17, 2016 5:26 pm
- Location: SOMERSET UK
Re: Timing side bush.
If you are using a feeler "blade" as opposed to round wire. I would say the clearance is considerably more than 5 thou. As the gauge would be sitting as a tangent to the shaft.
si is does non opportunus vos postulo a maior pango
-
Brad
- Posts: 109
- Joined: Thu Jun 05, 2008 8:15 pm
- Location: KENT UK
Re: Timing side bush.
Yes you are quite right, but with only a trimmed down flat blade to hand, hence my comment, "Although not very precise........"Harry44 wrote:If you are using a feeler "blade" as opposed to round wire. I would say the clearance is considerably more than 5 thou. As the gauge would be sitting as a tangent to the shaft.
But thank you all the same.
If it ain't broke, fix it till it is. 