Help Please with B52 Gearbox Part

Information relating to the Matchless G80 or AJS Model 18 500cc Heavyweight.
Locked
User avatar
spookefoote1956
Member
Posts: 1836
Joined: Mon May 01, 2017 7:32 pm
Location: Wales Innit

Help Please with B52 Gearbox Part

Post by spookefoote1956 »

Nearly finished.jpg
Peg and spring.jpg
Hello again. Just about to finish the 52 box and there's one bit I can't figure where it goes. Please help!
You do not have the required permissions to view the files attached to this post.
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: Help Please with B52 Gearbox Part

Post by dave16mct »

If you pull out the cam spindle, behind it you'll find a hole. ( you'll have to take the split pins) The plunger goes in there, spring first. Look at the back of the cam spindle, you'll see the dents which register the gears.
Dave.
User avatar
spookefoote1956
Member
Posts: 1836
Joined: Mon May 01, 2017 7:32 pm
Location: Wales Innit

Re: Help Please with B52 Gearbox Part

Post by spookefoote1956 »

Excellent, got it, done it. Thanks you are ten men!
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
Locked