g80 chain case breather ??

Information relating to the Matchless G80 or AJS Model 18 500cc Heavyweight.
andy johnson
Member
Posts: 25
Joined: Wed Sep 06, 2017 11:07 am
Location: STH YORKS UK

Re: g80 chain case breather ??

Post by andy johnson »

cracked it ! move engine breather pipe out of the way , push footrest as forward as possible and it drops down , hey presto !!!
thanks forth replys and info gentlemen
regards
andy
Mick D
Posts: 2886
Joined: Mon Mar 24, 2014 5:44 pm
Location: Aberdeenshire

Re: g80 chain case breather ??

Post by Mick D »

Hi Andy

You need to get a straight pull on the case and jiggle it gently as you pull to ease the rotor out of the stator - make sure you disconnect the alternator bullets first ;)

Regards Mick
andy johnson
Member
Posts: 25
Joined: Wed Sep 06, 2017 11:07 am
Location: STH YORKS UK

Re: g80 chain case breather ??

Post by andy johnson »

thanks mick ! its all apart now , the cable grommet was in two bits so not doing its job , ill clean everything up and await new gasket and grommet , hopefully tomorrow !

regards
andy :)
Locked