Clutch / Gearbox Identification and lock washer

Information relating to the Matchless G11 or AJS Model 30 600cc twin
Locked
User avatar
MartinAmes
Member
Posts: 62
Joined: Thu Apr 21, 2011 12:30 pm
Location: WEST MIDLANDS UK

Clutch / Gearbox Identification and lock washer

Post by MartinAmes »

I have a Matchless G11 with a 1956 engine. After taking various bits apart to remove the engine to get it repaired, I have come to put the clutch back together. The lock washer for centre retaining nut is in poor condition and needs replacing.

The spares list shows a 5 spring 5 plate clutch.
I have a 3 spring 5 plate clutch and the lock washer is clearly different.
I believe I have an AMC gearbox.

Can anybody tell me what the correct code is for the lock washer for my clutch so I can order one, and also what spares list / diagram I would find this clutch in.

I have placed various photos under the pictures section, showing the clutch, old / new wrong lock washer, gearbox number.
Don Madden
Member
Posts: 2882
Joined: Mon Jan 01, 1990 12:00 am
Location: USA USA

Clutch / Gearbox Identification and lock washer

Post by Don Madden »

It is an AMC Gearbox & clutch. Comparing the serial number with those in the North American Section registry it fits into the 1961 range. The "R" indicates close ratio, probably from a CSR. The correct lockwasher, 040374 is a thin split lock washer, not a tab washer. Cheers, Don.
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Clutch / Gearbox Identification and lock washer

Post by ajscomboman »

The new lock washer shown is for a Burman clutch and the worn out one I'm not sure about. The parts service do stock locking washers for the AMC clutch which is what you require.

(040374)
LOCK WASHER FOR CLUTCH RETAINING NUT.AMC CLUTCH. £0.79
EACH
Locked