000217

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Locked
bilstonbiker
Member
Posts: 7
Joined: Wed Nov 01, 2017 12:27 pm
Location: West Midlands UK

000217

Post by bilstonbiker »

does anyone know if this nut will fit a 3/8 cylinder stud on a 67 csr thanks in advance Ken
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: 000217

Post by Rob Harknett »

Well it is a 3/8" 26 TPI double hex cylinder base nut. You will need to check your parts list to make sure it is correct for your bike. This part has been in use since the pre war era when it was old pt. no. STD 217
User avatar
Stuoyb
Posts: 1229
Joined: Tue Jul 27, 2004 1:00 am
Location: BEDFORDSHIRE UK

Re: 000217

Post by Stuoyb »

According to the parts list, 000217 was used from 1964 0n twins.
bilstonbiker
Member
Posts: 7
Joined: Wed Nov 01, 2017 12:27 pm
Location: West Midlands UK

Re: 000217

Post by bilstonbiker »

thanks for the replies just ordered a few more bits off club shop thanks again KEN
Locked