Hi,
My A/R cable was too long to run properly from the A/R lever to the mag. I got one new, wich is perfect. But I noticed a problem : when the cable is released in position full advance, the "little piston" that actuates the cam goes down too far, and the cam become loose from full advance to full retard, and the lever some times remains solid. It is difficult to have a good setting, i.e. vith the cam pushed by the spring against the little screw wich limits the cam rotation. Fully released, the cable does not actuate the cam, slightly tight, there is a play between the "little piston" and the cam slot. Have I missed something ? Your advices welcome !
Cheers.
J.N.
- New Users
- Board index Help G12 / AJS Model 31
-
- It is currently Tue Apr 23, 2024 10:19 pm
- All times are UTC+01:00
A/R cable on 650 CSR
Information relating to the Matchless G12 or AJS Model 31 650cc twin
-
- Member
- Posts: 601
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: FRANCE
Return to “G12 / AJS Model 31”
Jump to
- Public Forums
- ↳ General Topics
- ↳ Modern AJS
- ↳ Help
- ↳ Frequent Questions
- ↳ Recommendations
- ↳ Where are they now?
- ↳ News Items
- Help
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18
- ↳ G80 Harris
- ↳ G9 / AJS Model 20
- ↳ G11 / AJS Model 30
- ↳ G12 / AJS Model 31
- ↳ G15 / AJS Model 33
- ↳ Competition / Racers
- ↳ Prewar
- ↳ Two Strokes
- ↳ Pre-War
- ↳ Post-War Classic
- ↳ G2 / Model 14
- ↳ G3 / Model 16
- ↳ G5 / Model 8
- ↳ G80 / Model 18 / Harris
- ↳ G9 / Model 20
- ↳ G11 / Model 30
- ↳ G12 / Model 31
- ↳ G15 / Model 33
- ↳ Modern AJS
- Sections
- ↳ Bristol
- ↳ Cheshire and North Wales
- ↳ Chiltern
- ↳ East Berkshire
- ↳ East London and Essex
- ↳ East Midlands
- ↳ East Suffolk
- ↳ East Yorkshire
- ↳ Fenrunners
- ↳ Hampshire
- ↳ Heart of England
- ↳ Kent
- ↳ North East
- ↳ Notts and Derby
- ↳ Oxford
- ↳ Poachers
- ↳ Surrey
- ↳ Sussex
- ↳ Wey Valley
- ↳ Worcester
- ↳ France