66 ( I think ) g12 Norton forks

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Locked
moley
Member
Posts: 559
Joined: Sat Jan 01, 2000 12:00 am
Location: EAST SUSSEX UK

66 ( I think ) g12 Norton forks

Post by moley »

Hi all

Trying to locate some missing parts from my next project a 66 g12.

I see the jampot spares list 030041 bottom fork cover tubes. Can anyone tell me
If this part is for the long road holders forks ?

Many Thanks

Andy
JEAN-NOEL
Member
Posts: 601
Joined: Wed Oct 12, 2005 10:45 pm
Location: FRANCE

Re: 66 ( I think ) g12 Norton forks

Post by JEAN-NOEL »

Hello Andy,
mine came from AMOC Spares, and fit perfectly.
Cheers.
mdt-son
Member
Posts: 373
Joined: Wed Feb 01, 2012 1:22 pm
Location: Vestland NORWAY

Re: 66 ( I think ) g12 Norton forks

Post by mdt-son »

They are not.

According to the parts book, the correct part number is NM50117 (Fork slider extension). This is not listed in the N-V supersession list, however Andover-Norton lists "FORK SLIDER EXTENSION (50117) (LONG) part-no: 03.0453".

So, your part number is 030453. They are available with Andover Norton.

For other "Roadholder" parts, please look up the G15 parts fiche at A-N.

-Knut
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: 66 ( I think ) g12 Norton forks

Post by ajscomboman »

mdt-son wrote:They are not.

According to the parts book, the correct part number is NM50117 (Fork slider extension). This is not listed in the N-V supersession list, however Andover-Norton lists "FORK SLIDER EXTENSION (50117) (LONG) part-no: 03.0453".

So, your part number is 030453. They are available with Andover Norton.

For other "Roadholder" parts, please look up the G15 parts fiche at A-N.

-Knut
030041 is the Black enamel spring cover not the oil seal holder 030453. The description is not the best though stating it as bottom spring cover.
moley
Member
Posts: 559
Joined: Sat Jan 01, 2000 12:00 am
Location: EAST SUSSEX UK

Re: 66 ( I think ) g12 Norton forks

Post by moley »

Hi all

I now have another problem

Assembled forks and without weight if bike on forks I can only see approx one inch of the chrome slider
Extensions

The problem is the in the damper assembly I must have either a shorter alloy damper tube or shorter damper rods

I have 25” stanchions
5” slider extensions
8.5” enamel shrouds
Alloy damper tube 9”
Damper rod 20”

My question is with 25” stanchions but length are the alloy damper tubes and the damping rods that go into them ?

Many thanks

Andy
moley
Member
Posts: 559
Joined: Sat Jan 01, 2000 12:00 am
Location: EAST SUSSEX UK

Re: 66 ( I think ) g12 Norton forks

Post by moley »

For Future reference alloy tubes should be 10.50"

Andy
Locked