G15 hydraulic clutch & front brake

Information relating to the Matchless G15 or AJS Model 33 750cc twin. This also includes the G15 Mk II and the G15/45
Posts: 15
Joined: Thu Apr 28, 2005 12:00 am
Location: HERTS UK

G15 hydraulic clutch & front brake

Postby StuartN » Fri May 13, 2005 1:15 pm

Next problem - my bike has had a hydraulic conversion using master cylinders off a modern machine (I don't know which but I suspect from the land of the rising sun). Clutch and brake actuation work beautifully but there are no obvious bleed nipples. How do I bleed the sytems or change the fluid? I am also intrigued to know what other components have been used.
The clutch itself slips a bit so I need to investigate. Any advice on this too would be welcome.


Member
User avatar
Posts: 936
Joined: Mon Jan 01, 1990 12:00 am
Location: NORWICH UK

G15 hydraulic clutch & front brake

Postby Colin F » Fri May 13, 2005 1:44 pm

I would guess this is probably a "saggers" conversion.
If you look inside the gear box inspection cover you should find the slave cylinder there with the bleed nipple at the top.
The brakes are probably mini parts, the bleed nipple is on the brake plate.

Contact me dirrect if you require further info.

Colin

Return to G15 / AJS Model 33

Who is online

Users browsing this forum: No registered users and 1 guest