Rear Loop Bottom Stud Spacer

Information relating to the Matchless G15 or AJS Model 33 750cc twin. This also includes the G15 Mk II and the G15/45
Member
Posts: 1050
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: Rear Loop Bottom Stud Spacer

Postby g80csp11 » Thu Aug 13, 2020 7:06 pm

Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11

Member
User avatar
Posts: 3275
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Rear Loop Bottom Stud Spacer

Postby ajscomboman » Thu Aug 13, 2020 7:19 pm

raffles wrote:Just trying for a bit of humour
Tony



:beer: :beer:

Member
User avatar
Posts: 3275
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Rear Loop Bottom Stud Spacer

Postby ajscomboman » Thu Aug 13, 2020 7:26 pm

g80csp11 wrote:Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11


I know what the bugger looks like! I've been getting too close and personal with mine!! It was supposedly a rebuilt article but it's not proving to be quite what I'd hoped. I'm awaiting some g/box bushes and a sprocket that's not as hooked as Cpt Hooks hand!! Then I'll be back into the reassembly along with new stator and rotor. I've got a little wiggle room with the new stator so hopefully I'll be able to centre it a bit better than the previous owner set it up.

I'll still be watching your your progress though.

Previous

Return to G15 / AJS Model 33

Who is online

Users browsing this forum: No registered users and 2 guests