What would be the correct configuration on rollers on my 61 G80cs big-end Ive seen different articles e:g 3 rows of ten 1/4" x1/4," 28 1/4"x1/4"or 14 1/2"x1/4"rollers.Also has anyone had dealings with ALPHA bearings is there chance they might stock the right one.
cheers highfield
BIG-END ROLLERS
-
- Posts: 12
- Joined: Wed Nov 05, 2014 9:03 pm
- Location: Australia AUSTRALIA
BIG-END ROLLERS
g mitchell
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
Re: BIG-END ROLLERS
The original configuration was two long rollers per row on short stroke motors & there short ones on long stroke. I suggest you find an engineer familiar with the engine & fit the big end correctly. Don.