BIG-END ROLLERS

Information relating to the Matchless G85 500cc Heavyweight, AJS 7R, Matchless G45 and Matchless G50
Locked
highfield
Posts: 12
Joined: Wed Nov 05, 2014 9:03 pm
Location: Australia AUSTRALIA

BIG-END ROLLERS

Post by highfield »

What would be the correct configuration on rollers on my 61 G80cs big-end Ive seen different articles e:g 3 rows of ten 1/4" x1/4," 28 1/4"x1/4"or 14 1/2"x1/4"rollers.Also has anyone had dealings with ALPHA bearings is there chance they might stock the right one.
cheers highfield
g mitchell
Don Madden
Member
Posts: 2882
Joined: Mon Jan 01, 1990 12:00 am
Location: USA USA

Re: BIG-END ROLLERS

Post by Don Madden »

The original configuration was two long rollers per row on short stroke motors & there short ones on long stroke. I suggest you find an engineer familiar with the engine & fit the big end correctly. Don.
Locked