1936 Model 22 - Mudguards

Information relating to Matchless and AJS Models built prior to 1939
Locked
RobEvans
Posts: 3
Joined: Fri Jul 08, 2016 9:49 pm
Location: Lincolnshire

1936 Model 22 - Mudguards

Post by RobEvans »

Could anyone give me a steer ?

I have a 1936 model 22 which has much later mudguards fitted, I am after putting an original type mudguard on the front & rear ..

Who should I turn to ? Any good reproductions available ?

Any help would be appreciated,

Regards Rob
User avatar
Rob Harknett
Member
Posts: 11236
Joined: Mon Jan 01, 1990 12:00 am
Location: ESSEX UK

Re: 1936 Model 22 - Mudguards

Post by Rob Harknett »

36/22 guards are quite basic domed section . From memory 4" front 5" rear ( I can check mine ) Just cut the rear so the joint is in the correct place, Just 3 fittings to remove, then allows guard / no. plate / stays all removable in one lump. Rad would need to suite 19" tyre.
RobEvans
Posts: 3
Joined: Fri Jul 08, 2016 9:49 pm
Location: Lincolnshire

Re: 1936 Model 22 - Mudguards

Post by RobEvans »

Thanks for the response Rob
;)
Locked