Stormer crankpin removal

Information on the Stormer 2-stroke machines
Locked
landy72
Posts: 2
Joined: Thu Jul 30, 2015 11:54 am
Location: Vic Australia

Stormer crankpin removal

Post by landy72 »

Hi new to the forum from Aus. Just purchased a 250 stormer, it needed a new con rod kit. I read that you have to remove the crank- pin plugs first, before pressing out the pin. Are these just a shallow plug? It appears to be a small pin surrounded by a larger washer, but maybe it is just one piece. Thought I would ask before I start messing with it. Any info or diagrams of the set up would be great. (The new rod kit does not appear to have plugs!!)
Andy.
landy72
Posts: 2
Joined: Thu Jul 30, 2015 11:54 am
Location: Vic Australia

Re: Stormer crankpin removal

Post by landy72 »

Thanks for the PM G5 butch, helped heaps. I didn't realise the crankpin would be hollow.
Locked