Hi,
Been doing some work on the bike, need to pick the collective brain
What spark plugs is every one using ?
Valve clearance the haynes manual is a vague ?
Also need to find a spring for the Rear chain tensioner, ideas before I go to AJS
Whoops some what big headed of me to think you all know what bike it is 125 EOS
Chris
Quick question ...
-
- Posts: 7
- Joined: Wed Apr 04, 2012 8:00 pm
- Location: UK
- NoodleHead
- Posts: 31
- Joined: Thu May 31, 2012 4:15 pm
- Location: UK
- Contact:
Quick question ...
Hi joker7. Standard plugs are NGK
cr7hsa/cr7hs or a better bet would be upgraded type NGK cr7hix.
Valve clearances are: inlet 0.08mm (003") exhaust 0.15mm (006")
Regal Raptor DD125E-5 EOS
cr7hsa/cr7hs or a better bet would be upgraded type NGK cr7hix.
Valve clearances are: inlet 0.08mm (003") exhaust 0.15mm (006")
Regal Raptor DD125E-5 EOS
- NoodleHead
- Posts: 31
- Joined: Thu May 31, 2012 4:15 pm
- Location: UK
- Contact:
Quick question ...
Spring is almost certainly specific for bike. AJS is your best call.