Hi I have a regal raptor dd125e-8 2009 does any one
Know the size of the stud and nut for the exhaust
Apparently their m6 36mm long but mine look more like
M8 nuts. Any help would be great. Thanks
Exhaust stud and nut size???
-
- Posts: 1
- Joined: Sun Jul 24, 2016 9:36 pm
- Location: United Kingdom
-
- Member
- Posts: 8549
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Exhaust stud and nut size???
Welcome, Robert.
Can't help directly I'm afraid, and few of us have Chinese AJS, but since no-one seems to have the answer the simplest solution is to buy an M6 and an M8 nut from Wickes or B&Q and try it for fit on the stud.
Can you not tell the nut size from a spanner that fits it?
There is a Haynes manual for Chinese bikes but I doubt that it'll give nut sizes...
https://haynes.co.uk/catalog/manuals-on ... -trackstar
Can't help directly I'm afraid, and few of us have Chinese AJS, but since no-one seems to have the answer the simplest solution is to buy an M6 and an M8 nut from Wickes or B&Q and try it for fit on the stud.
Can you not tell the nut size from a spanner that fits it?
There is a Haynes manual for Chinese bikes but I doubt that it'll give nut sizes...
https://haynes.co.uk/catalog/manuals-on ... -trackstar
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 351
- Joined: Tue Jul 28, 2009 5:51 pm
- Location: BERKSHIRE UK
Re: Exhaust stud and nut size???
You could always give AJS down at Andover a quick bell, they're were very helpful when I had to replace the drive side oil seal on an ECO-2.