Exhaust stud and nut size???

This area is for discussion/information on the "modern" AJS motorcycles manufactured in China from 2006 onwards.
Locked
sarkrob84
Posts: 1
Joined: Sun Jul 24, 2016 9:36 pm
Location: United Kingdom

Exhaust stud and nut size???

Post by sarkrob84 »

Hi I have a regal raptor dd125e-8 2009 does any one
Know the size of the stud and nut for the exhaust
Apparently their m6 36mm long but mine look more like
M8 nuts. Any help would be great. Thanks
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: Exhaust stud and nut size???

Post by SPRIDDLER »

Welcome, Robert.
Can't help directly I'm afraid, and few of us have Chinese AJS, but since no-one seems to have the answer the simplest solution is to buy an M6 and an M8 nut from Wickes or B&Q and try it for fit on the stud.
Can you not tell the nut size from a spanner that fits it?

There is a Haynes manual for Chinese bikes but I doubt that it'll give nut sizes...

https://haynes.co.uk/catalog/manuals-on ... -trackstar
'There is a tide in the affairs of men
Which taken at the flood............'
Cerberus
Member
Posts: 348
Joined: Tue Jul 28, 2009 5:51 pm
Location: BERKSHIRE UK

Re: Exhaust stud and nut size???

Post by Cerberus »

You could always give AJS down at Andover a quick bell, they're were very helpful when I had to replace the drive side oil seal on an ECO-2.
Locked