Tempest Scrambler gearbox sprocket
-
- Member
- Posts: 851
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Tempest Scrambler gearbox sprocket
Has anyone put a larger gearbox sprocket on a Tempest Scrambler?
If so how many teeth larger 1 or 2?
Any ideas where to buy one, there are plenty of Lexmoto ones on the internet ranging from 14 to 17 teeth, would one fit?
If so how many teeth larger 1 or 2?
Any ideas where to buy one, there are plenty of Lexmoto ones on the internet ranging from 14 to 17 teeth, would one fit?
-
- Member
- Posts: 610
- Joined: Mon Jan 01, 1990 12:00 am
- Location: NORTHAMPTONSHIRE UK
Re: Tempest Scrambler gearbox sprocket
Who do you think will know ? Buy one and try it you tight old sod
Tony
Tony
-
- Member
- Posts: 851
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: Tempest Scrambler gearbox sprocket
Tony,
The reason that I asked was someone may have done it, looking at the pictures of various sprockets they're similar but some centres are different.
Not being tight just being careful.
Dudley
The reason that I asked was someone may have done it, looking at the pictures of various sprockets they're similar but some centres are different.
Not being tight just being careful.
Dudley
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Tempest Scrambler gearbox sprocket
Either size will be absolutely fine Diddley, as your bikes rarely seem to manage more than 200 yds before conking out.39speedtwin wrote:Has anyone put a larger gearbox sprocket on a Tempest Scrambler?
If so how many teeth larger 1 or 2?
![Wink ;)](./images/smilies/icon_e_wink.gif)
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 851
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: Tempest Scrambler gearbox sprocket
That was 2018 Spriddles, 2019 no problems.
- REW
- Member
- Posts: 1363
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: CO DURHAM UK
Re: Tempest Scrambler gearbox sprocket
Yeah, but it's 2020 Dudley!
Be aware that many modern bikes use electronics to calculate the road speed from the rotation speed of the gearbox sprocket. Go up 1 tooth and the speedo is often spot on accurate and the fuel injection computer still copes. 2 teeth and the speedo is way off and the fuel injection can't cope with the changed road speed/throttle position demands.
I would try 1 tooth first.
Be aware that many modern bikes use electronics to calculate the road speed from the rotation speed of the gearbox sprocket. Go up 1 tooth and the speedo is often spot on accurate and the fuel injection computer still copes. 2 teeth and the speedo is way off and the fuel injection can't cope with the changed road speed/throttle position demands.
I would try 1 tooth first.
Ron
1951 Matchless G3L thumping round the Durham Dales.
1951 Matchless G3L thumping round the Durham Dales.
-
- Member
- Posts: 851
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: Tempest Scrambler gearbox sprocket
Speedometer runs from front wheel so wouldn't be affected, firstly find a suitable sprocket, hence the posting.
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Tempest Scrambler gearbox sprocket
They only list the standard 14T front and 45T rear sprockets which are the same sizes that are fitted to the touring Tempest Roadster.
https://www.ajs-shop.co.uk/acatalog/Cha ... ets-2.html
How about calling them for advice, maybe it would be more practical to fit a smaller rear sprocket than the standard 45T one and then you could make less severe changes than with the 14T front?
https://www.ajs-shop.co.uk/acatalog/Cha ... ets-2.html
How about calling them for advice, maybe it would be more practical to fit a smaller rear sprocket than the standard 45T one and then you could make less severe changes than with the 14T front?
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 851
- Joined: Thu Jan 01, 1998 12:00 am
- Location: ESSEX UK
Re: Tempest Scrambler gearbox sprocket
Yes I had looked at the AJS website, which is why I asked the question Neville, as the engine is generic Yamaha there should be alternative sprockets available, just a matter of finding out to which bikes they were fitted. Much easier to change the front one than the rear.
- ajscomboman
- Member
- Posts: 3959
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Tempest Scrambler gearbox sprocket
Dudley have a look at Chinese Motorcycle Parts Online or CMPO for short and search for Lextek front sprocket 428-15t 156fmi or by model Huoniao HN125-4F they look very very similar to the sprocket on the AJS website.