52 G80s seat mounting
-
- Posts: 6
- Joined: Wed Nov 28, 2012 5:45 pm
- Location: Los Angeles
52 G80s seat mounting
Hey all I'm stumped on how to mount the solo seat on my G80s. My seat and the mounting hole seemed to be quite far apart. Now is there a couple plates I'm missing or do I have to fashion something up. A picture of someones seat connected to the forward holes WITHOUT a tank on would be perfect for me to figure it out. If there's a part number for this part I'd like to know. Cheers
-
- Member
- Posts: 243
- Joined: Sat Jan 01, 1994 12:00 am
- Location: Newzealand NEW ZEALAND
Re: 52 G80s seat mounting
Do you have the correct saddle ? The AMC one has an extension on its nose. The springs sit vertically from the 2 mounts on the rear subframe (to give you a position) and the nose sits into the recess at the rear of the tank
- clive
- Member
- Posts: 5676
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: 52 G80s seat mounting
The pattern seats around need a couple of straight plates attached to mount it to the hole in the frame rail. Mount the springs and tank to get an idea how long it should look and then measure the length you need.
clive
if it ain't broke don't fix
if it ain't broke don't fix