Hi Dave,
The best info you'll come across will be on the AJS and Matchless Archives, the web address for this is: http://80.62.76.243/ if you can't find it here it possibly doesn't exist.
The best of luck for the rebuild. [:D]
Regards Mike.
Complete G2 rebuild?
- Tolly
- Member
- Posts: 647
- Joined: Mon Jan 01, 2001 12:00 am
- Location: KENT UK
Complete G2 rebuild?
_______________________________________________________
Experience is something you don't get until just after you need it.
Experience is something you don't get until just after you need it.
- Colin F
- Member
- Posts: 936
- Joined: Mon Jan 01, 1990 12:00 am
- Location: NORWICH UK
- Contact:
Complete G2 rebuild?
The book that I found was the most help when I first started, gave a lot of basic info, and a good general guide was FW Neill "Pink " book on singles.
This is reputed to be out of print but I know that there are several copies available from a Dutch dealer. (Sorry details not to hand but I can locate).
This is reputed to be out of print but I know that there are several copies available from a Dutch dealer. (Sorry details not to hand but I can locate).
- Tolly
- Member
- Posts: 647
- Joined: Mon Jan 01, 2001 12:00 am
- Location: KENT UK
Complete G2 rebuild?
Dave, check the timing side axle, on the crank, and the bearing. If there is too much play then you loose your oil pressure as the drive is from here to a little worm shaft. [:(]
Regards Mike.
Regards Mike.
_______________________________________________________
Experience is something you don't get until just after you need it.
Experience is something you don't get until just after you need it.