Clutch
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Clutch
After fitting a new clutch cable to my Model 8 (old one snapped) no matter what I did adjustment wise I couldn't set the clutch up so it wouldn't drag so to bits it comes, the clutch pressure plate springs were wound quite tight but after dismantling inspection/cleaning all the old shitty oil/de burring the plate tangs and basket slides all looked good. So put it back together setting the springs level and even with the end of the studs the clutch is working perfect now also so used A.T.F. in the primary case this may keep it a bit cleaner. As I thought I was looking at spending a few quid to rectify it I'm well chuffed not often things work out so easy
?
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Clutch
Having set the springs all level with the cups, and the clutch worked OK, was a bit fortunate. One, as it was at that position they were not too tight or loose. Two, all springs were of equal strength. Usually you have to adjust each spring individually, so that plates open evenly all round, to prevent drag.
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Clutch
It's amazing what difference a quick strip & clean makes to these clutches.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Clutch
It is indeed. It is all I have been doing to my as found 1936 AJS for the last 30 years. It even has a mixture of cork and fibre plates. Probably in the bike years before I found its remains in a field near the barn.
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Clutch
Rob
That's the way I have always set my B.S.A bike clutches up so gave it a go with the Model 8 and its worked fine mind you I have done clutches that need more or less tension on each spring to make it operate even without slipping or dragging, luck must have been on my side as the pressure and plates are separating even and the clutch is working perfect with 1/2 a turn back on pushrod then locked no slip or drag.
That's the way I have always set my B.S.A bike clutches up so gave it a go with the Model 8 and its worked fine mind you I have done clutches that need more or less tension on each spring to make it operate even without slipping or dragging, luck must have been on my side as the pressure and plates are separating even and the clutch is working perfect with 1/2 a turn back on pushrod then locked no slip or drag.
?
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Clutch
Well the clutch is working champion as does the rest of the bike at the mo I have done a bit more tinkering and made some more cosmetic changes but by hec its cutting in nippy up this end of the U.K.
You do not have the required permissions to view the files attached to this post.
Last edited by shifter on Tue Oct 10, 2017 7:13 pm, edited 1 time in total.
?
- ajscomboman
- Member
- Posts: 3961
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Clutch
I spy more changes to my old bike!!! No fully enclosed chainguard and the rear brake arm changed.
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Clutch
The enclosed chain guard is hanging up in the workshop as I am not keen on them, I fabricated the one that's on as I like it better along with the brake arm I hope you can agree with the changes Rob. We are going over the boarder and up in the hills of bonny Scotland at the weekend need to get a few riding miles in as we haven't done many lately with other commitment's having to be dealt with
Last edited by shifter on Mon Oct 09, 2017 9:23 pm, edited 1 time in total.
?
-
- Member
- Posts: 3369
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Clutch
Wish I had a fully enclosed chainguard on the G80S. My 1966 14CSR didn't have one though. Wish I still had it, I thought it was a lovely thing.
I bet fully enclosed saves a lot on chains if you do higher mileages even if not stylish.
Although my mileage hasn't been as much as I'd hoped this year.
Will be in Scotland a week on Friday for half term over at Newton Stewart; wrong side of the country for you!
Johnny B
I bet fully enclosed saves a lot on chains if you do higher mileages even if not stylish.
Although my mileage hasn't been as much as I'd hoped this year.
Will be in Scotland a week on Friday for half term over at Newton Stewart; wrong side of the country for you!
Johnny B