Hi All,
Well, finally bit the bullet to cure several issues with my G3 that resisted all attempts to cure.
After reading many posts about the same problems others were having with leaky and hard to operate petrol taps, worn old Monobloc carbs and scattergun idle quality, it was time to place another order with the good folks at AMOC spares.
So just finished swapping the brass petcock taps which were impossibly stiff, for nice new plated ones using Dowty washers to seal them to the tank to get rid of the old, rubbery, leaky ones and thus preventing the garage filling with fumes and becoming a real fire risk!
Also a nice, new Monobloc re-jetted as per my request with a 200 main jet (air filter fitted), and after a quick swarf check and blow through, working perfectly with no leaks and serving up a swiss watch like, LOL, tick over. What a transformation. Should have swapped it long ago.
Thanks to the people at AMOC spares for yet another spot on, lightening fast order turnaround.
Idle quality and petrol leaks
- Expat
- Member
- Posts: 1036
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Idle quality and petrol leaks
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- clanger9
- Posts: 1163
- Joined: Sat Jun 20, 2015 9:38 am
- Location: Chester, UK
Re: Idle quality and petrol leaks
I agree, a new (or resleeved) carb makes a massive difference to idle! For a modest outlay, it totally transformed my bike.
1989 Moto Morini Dart 350
1993 Ducati 750SS
1993 Ducati 750SS
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: Idle quality and petrol leaks
As did mine, a re-sleeved one done properly will probably be better than a new Amal carb!! got mine done here, very thorough and professional if not Quick... my bike now ticks over like a Swiss watchclanger9 wrote:I agree, a new (or resleeved) carb makes a massive difference to idle! For a modest outlay, it totally transformed my bike.
Martin Bratby, on 01543 572583, or mobile 0777 2169524
Martin Bratby
1 Coachhouse Works
Limepit Lane
Huntington
Cannock
South Staffs
WS12 4PA
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: Idle quality and petrol leaks
Ozmadman wrote:As did mine, a re-sleeved one done properly will probably be better than a new Amal carb!! my bike now ticks over like a Swiss watchclanger9 wrote:I agree, a new (or resleeved) carb makes a massive difference to idle! For a modest outlay, it totally transformed my bike.
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
- Expat
- Member
- Posts: 1036
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Idle quality and petrol leaks
That is unbelievably smooth, mine's not quite as regular
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- Ozmadman
- Posts: 2651
- Joined: Wed Dec 14, 2011 1:02 am
- Location: ESSEX UK
Re: Idle quality and petrol leaks
It ticks over more regular than my heart rate!! maybe I need a re-sleeveExpat wrote:That is unbelievably smooth, mine's not quite as regular
Paul
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
1960 Model 8
1974 Yamaha RD250B US Model 6 speed
- Expat
- Member
- Posts: 1036
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: Idle quality and petrol leaks
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)