1947 exhaust valve oil drilling
-
- Posts: 514
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 1947 exhaust valve oil drilling
Sorry about the delay in responding. Having a few problems at the moment. I have some other photos to add to yours Peter. Hope to get it done this week, you are definitely correct in your last post - is there any sign of a screw thread in the open hole on the outside of your head, to take a blanking plug? I tapped mine out to 1/4" BSF.
-
- Posts: 69
- Joined: Thu Sep 07, 2017 3:36 pm
- Location: Somerset
Re: 1947 exhaust valve oil drilling
No trace of threads at all. I have tapped it 1/4 BSF as well.
Not plugging it yet, until I have dropped the Ex valve out to check that the oil flow is clear all the way to the valve stem.
Not plugging it yet, until I have dropped the Ex valve out to check that the oil flow is clear all the way to the valve stem.
- Samuel
- Member
- Posts: 1068
- Joined: Tue Sep 09, 2003 1:00 am
- Location: Somerset UK
-
- Member
- Posts: 83
- Joined: Fri Sep 16, 2016 7:51 am
- Location: QUEENSLAND AUSTRALIA
Re: 1947 exhaust valve oil drilling
does any one have a photo of the head and drilling, particularly where t meets the push rod tube?hatrack wrote:On a run at the weekend I saw an iron head Matchless with exactly the same arrangement and the middle oil gallery was blanked off as I expected it should be. The owner who had some experiance of the things, thoroughly agreed. Also looking over an article in Real Classic revealed a picture in which the blanking plug was there. So I am now quite sure how to proceed.
But where did the blanking plug go?
I know that the previous owner had work done on the engine including rectifying a sticking exhaust valve. Maybe the plug was removed to check the oilway was clear, and some how, didn't get reffitted.
I'll never know, but its the only explanation that makes much sense.
-
- Member
- Posts: 612
- Joined: Mon Jan 01, 1990 12:00 am
- Location: NORTHAMPTONSHIRE UK
Re: 1947 exhaust valve oil drilling
Can we go back to the "O" rings there are several types of material.WHICH one is the best
Tony
Tony