Hello,
I would like to restore my AJS Model 18S as close to the 1958 specs as far as it can get. The headlamp shell has a hole in the top, where an ignition switch was mounted. I would like to close this hole. What was the correct switch for the 58 model? The 1958/59 wire harness diagram shows the combined ignition/ lighting switch. Was there also a version with light switch only (no ignition)? I cannot find a wiring diagram with alternator/ coil and simple light switch.
Many thanks for any feedback.
Christian
1958 Headlamp - Which switch?
-
- Posts: 46
- Joined: Tue Nov 14, 2017 8:36 am
- Location: GERMANY
1958 Headlamp - Which switch?
You do not have the required permissions to view the files attached to this post.
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 1958 Headlamp - Which switch?
http://archives.jampot.dk/technical/Ele ... C_1958.pdf
http://archives.jampot.dk/technical/Ele ... 8-1959.pdf
Things get complicated if you do not have all the correct parts. In the above links you will see correct Lucas parts and wiring.
http://archives.jampot.dk/technical/Ele ... 8-1959.pdf
Things get complicated if you do not have all the correct parts. In the above links you will see correct Lucas parts and wiring.
-
- Posts: 46
- Joined: Tue Nov 14, 2017 8:36 am
- Location: GERMANY
Re: 1958 Headlamp - Which switch?
Hello Rob,
thanks for the reply and the links.
There is some contradictory or missing information though: the image of the headlamp MCH57 shows the simple lighting switch (31340A) instead of the lighting/ ignition switch (31443E) that is listed as the correct one. Also the wiring diagram shows the ignition-/ lighting switch.
I am looking for the wiring diagram for the 18CS version without ignition switch. Does anybody know which cables to connect when you have a lighting-only switch (Lucas 31340A)?
Thanks,
Christian
thanks for the reply and the links.
There is some contradictory or missing information though: the image of the headlamp MCH57 shows the simple lighting switch (31340A) instead of the lighting/ ignition switch (31443E) that is listed as the correct one. Also the wiring diagram shows the ignition-/ lighting switch.
I am looking for the wiring diagram for the 18CS version without ignition switch. Does anybody know which cables to connect when you have a lighting-only switch (Lucas 31340A)?
Thanks,
Christian
-
- Member
- Posts: 8580
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: 1958 Headlamp - Which switch?
I think I'm right in that an alternator/coil ignition system MUST have an ignition switch to isolate the battery and prevent the coil overheating (when the points are closed)?schrottschlecker wrote:I cannot find a wiring diagram with alternator/ coil and simple light switch.
If the bike's ignition is by magneto an ignition switch isn't necessary and wasn't fitted.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 1958 Headlamp - Which switch?
The bike appears to be coil ignition so surely will need combined switch. I believe the diagram given was OK for the wiring of that. If you only want a lighting switch, the fit a simple on off ignition switch elsewhere, that would need additional wiring. For a diagram of lighting switch only wiring, check say 1955 mag ignition 18S diagram.
-
- Posts: 46
- Joined: Tue Nov 14, 2017 8:36 am
- Location: GERMANY
Re: 1958 Headlamp - Which switch?
OK, that makes sence.SPRIDDLER wrote:I think I'm right in that an alternator/coil ignition system MUST have an ignition switch to isolate the battery and prevent the coil overheating (when the points are closed)?schrottschlecker wrote:I cannot find a wiring diagram with alternator/ coil and simple light switch.
If the bike's ignition is by magneto an ignition switch isn't necessary and wasn't fitted.
Is it also correct, that there is no regulator nor Zener diode in the alternator/coil models?
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: 1958 Headlamp - Which switch?
Hi
There is a rectifier but no regulator or zener diode.
Regards Mick
There is a rectifier but no regulator or zener diode.
Regards Mick
-
- Posts: 46
- Joined: Tue Nov 14, 2017 8:36 am
- Location: GERMANY
Re: 1958 Headlamp - Which switch?
All right, the rectifier I found in the parts box. Now I need the ignition-/ lighting switch.
Thanks for your help.
Christian
Thanks for your help.
Christian