000217
-
- Member
- Posts: 7
- Joined: Wed Nov 01, 2017 12:27 pm
- Location: West Midlands UK
000217
does anyone know if this nut will fit a 3/8 cylinder stud on a 67 csr thanks in advance Ken
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 000217
Well it is a 3/8" 26 TPI double hex cylinder base nut. You will need to check your parts list to make sure it is correct for your bike. This part has been in use since the pre war era when it was old pt. no. STD 217
- Stuoyb
- Posts: 1223
- Joined: Tue Jul 27, 2004 1:00 am
- Location: BEDFORDSHIRE UK
Re: 000217
According to the parts list, 000217 was used from 1964 0n twins.
-
- Member
- Posts: 7
- Joined: Wed Nov 01, 2017 12:27 pm
- Location: West Midlands UK
Re: 000217
thanks for the replies just ordered a few more bits off club shop thanks again KEN