022738 - Bolt, chrome, carrier MTG

General purpose topics/chat goes in here
Locked
56G80S
Member
Posts: 3354
Joined: Wed Oct 12, 2005 10:45 pm
Location: N YORKS UK

022738 - Bolt, chrome, carrier MTG

Post by 56G80S »

So I ordered these as I thought it was about time I stopped using the standard bolt while using it to secure a carrier leg (non AMC). The ones being replaced are those that fit into the captive bolt and are 5/16" BSF 26 TPI, 3/4" under the head with a short shoulder of about 1/8". I checked (they're new) with a die.

What arrived was 7/8" under head, fine, but were 3/8"; they won't even go through the hole in the mudguard. I seem to have got something wrong somewhere but sure I took these numbers from the 1956 parts list. Advert to go onto the For Sale section sometime.

Where I definitely went wrong was that I have an additional support (top mounting for towbar) going to these bolts, so really need 1" under the head, 1/4" shoulder plus maybe a small allowance for a washer. Whooops.

Looks like a trip to Hawk Fasteners in Middlesbrough. If it's fine will go on the Matchless.

Johnny B
39speedtwin
Member
Posts: 850
Joined: Thu Jan 01, 1998 12:00 am
Location: ESSEX UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by 39speedtwin »

Johnny, why don't you make one!
56G80S
Member
Posts: 3354
Joined: Wed Oct 12, 2005 10:45 pm
Location: N YORKS UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by 56G80S »

Dudley

I don't have the skills or equipment to make bolts. Want to be sure I don't stuff up the captive nut.

Wish I did have the equipment and skills or even electricity at my lock up.

It'll all be good.


See you at Rushden.

Johnny B
aobp11
Posts: 802
Joined: Wed Oct 12, 2005 10:45 pm
Location: GLD NETHERLANDS

Re: 022738 - Bolt, chrome, carrier MTG

Post by aobp11 »

FWIW, I used 2 rocker box bolts to mount my home made carrier. There is some choice in length among those bolts. These are 22 TPI and as far as I can see I can see I left the original mudguard nuts in place.

Albert
56G80S
Member
Posts: 3354
Joined: Wed Oct 12, 2005 10:45 pm
Location: N YORKS UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by 56G80S »

Thanks, I've got some spare. I'd need to run the die down but if I'm steadying but so long as I take it steady all would be good.

Johnny B
User avatar
REW
Member
Posts: 1366
Joined: Wed Oct 12, 2005 10:45 pm
Location: CO DURHAM UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by REW »

I buy from a2stainless. When necessary I cut to size, round the head a bit to AMC pattern and perhaps flatten some thread under the head:

http://www.a2stainless.co.uk/5-16-Diame ... 26FLW.aspx

They deliver quickly too.
Ron

1951 Matchless G3L thumping round the Durham Dales.
56G80S
Member
Posts: 3354
Joined: Wed Oct 12, 2005 10:45 pm
Location: N YORKS UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by 56G80S »

Cheers Ron, that's a good tip for the future but I'll need to get done on Wednesday ready to set off Thursday for Rushden.

Plan to be back in NE Monday night but working at Bishop on Tuesday.

Do you think you'll be going, company on the road would be good.

Johnny B
User avatar
REW
Member
Posts: 1366
Joined: Wed Oct 12, 2005 10:45 pm
Location: CO DURHAM UK

Re: 022738 - Bolt, chrome, carrier MTG

Post by REW »

I will be going Johnny but with car and tin tent sadly. See you there!
Ron

1951 Matchless G3L thumping round the Durham Dales.
Locked