Wheel spindle length

Information relating to the Matchless G5 or AJS Model 8 350cc Lightweight
Posts: 6687
Joined: Wed Sep 01, 2004 12:00 am

Re: Wheel spindle length

Postby SPRIDDLER » Fri Mar 08, 2019 2:03 pm

Martin.S wrote:Thanks Spriddler - I can see the part No's for the G5 and G2 spindle but not the CS or CSR they all had different hubs and the G2, CS and G5 all had different yokes - what did the CSR have?

I've no first hand experience of L/Ws and documentation for the CSR is scarce. The only Parts List I can find that shows the CSR covers virtually everything except hubs :roll:
For future use if you haven't seen it it's here:
http://archives.jampot.dk/book/Spares_l ... o_1966.pdf

By the way - Why do you poke Badgers with a spoon?

Because I'm an animal lover and it's less painful for them than with a fork.
I poke badgers with spoons.

Posts: 553
Joined: Thu Mar 31, 2005 12:00 am
Location: BERKS UK

Re: Wheel spindle length

Postby Andy51 » Fri Mar 08, 2019 9:48 pm

Hi Martin, sorry, but I thought you had h/wt Teledraulics from you picture, so I measured my 50s front axle that goes with the 1 1/8 and 1 1/4 in forks and 7 inch brake. Ignore my dimensions. Andy


Return to G5 / Model 8

Who is online

Users browsing this forum: No registered users and 11 guests