New front wheel bearings now available!

General purpose topics/chat goes in here
User avatar
vincentvv
Posts: 380
Joined: Sat Jun 21, 2014 1:17 pm
Location: Belgium

Re: New front wheel bearings now available!

Post by vincentvv »

Can anyone give me the outside/inside and wide of the bearings? In my line of work I often meet people from SKF. I am sure I can find those bearings cheaper.
Not fired is always a misser!
User avatar
Pharisee
Member
Posts: 1126
Joined: Tue Mar 15, 2016 8:51 pm
Location: Lincolnshire UK
Contact:

Re: New front wheel bearings now available!

Post by Pharisee »

The bearings on my new axle assembly from Vintage Bearings:-

Inside diameter 0.750"
Outside diameter 1.500"
Total width of bearing 0.680" (edge of inner ring to edge of outer ring)

Measured with a vernier caliper, not a micrometer. so for guidance only!!
I'm from the Fens.... Gimme six.
User avatar
vincentvv
Posts: 380
Joined: Sat Jun 21, 2014 1:17 pm
Location: Belgium

Re: New front wheel bearings now available!

Post by vincentvv »

Any article numbers to be found on this bearing? Timken made I see?
Not fired is always a misser!
User avatar
Pharisee
Member
Posts: 1126
Joined: Tue Mar 15, 2016 8:51 pm
Location: Lincolnshire UK
Contact:

Re: New front wheel bearings now available!

Post by Pharisee »

vincentvv wrote:Any article numbers to be found on this bearing? Timken made I see?
No numbers or any other information on the bearings. The inner ring is pressed up to a shoulder on the axle so maybe a number there but I'm not about to hammer it off!! :D
I'm from the Fens.... Gimme six.
bob121
Posts: 291
Joined: Sat Jan 14, 2017 11:48 am
Location: WEST MIDLANDS UK

Re: New front wheel bearings now available!

Post by bob121 »

There were markings on mine, but not ledgable.
Locked