washer for fork stem adjusting nut
- chappers1962
- Member
- Posts: 159
- Joined: Mon Dec 17, 2018 8:50 pm
- Location: UK
washer for fork stem adjusting nut
Hi all - Just a simple question. I have a 1956 G3LS which I'm rebuilding. In the user manual it shows a washer for the fork stem adjusting nut (see pic). However, I can't find this item in the illustrated parts catalog for this year of bike. Is one fitted and if so what's the part number?
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: washer for fork stem adjusting nut
(My previous reply changed due to misreading your question).
Indeed, not shown in the Spares List.
Manuals were occasionally incorrect.
My '54 G3LS (same forks) doesn't have that washer fitted.
Indeed, not shown in the Spares List.
Manuals were occasionally incorrect.
My '54 G3LS (same forks) doesn't have that washer fitted.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: washer for fork stem adjusting nut
Hi
The later manuals have the same illustration and a note under the table saying, "NB washer deleted from assembly"
Regards Mick
The later manuals have the same illustration and a note under the table saying, "NB washer deleted from assembly"
Regards Mick
- chappers1962
- Member
- Posts: 159
- Joined: Mon Dec 17, 2018 8:50 pm
- Location: UK
Re: washer for fork stem adjusting nut
many thanks