I need to replace the bearing races on my G80S, what's the best way of removing the old ones? To fit the new, is heat and the freezer enough? I don't have a press...
Replacing bearing races
-
- Posts: 208
- Joined: Sat Sep 07, 2019 5:51 pm
- Location: Hampshire UK
-
- Posts: 2886
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Replacing bearing races
Hi
Localised heat and sympathetic application of the hammer and punch will remove the old ones - freezing and heat will ease the new ones into place.
Regards Mick
Localised heat and sympathetic application of the hammer and punch will remove the old ones - freezing and heat will ease the new ones into place.
Regards Mick
- REW
- Member
- Posts: 1369
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: CO DURHAM UK
Re: Replacing bearing races
I did this a couple of years ago and many members contributed - read the full SP here: http://www.jampot.com/forum/viewtopic.php?f=12&t=23265
Ron
1951 Matchless G3L thumping round the Durham Dales.
1951 Matchless G3L thumping round the Durham Dales.