Hi
I've seen plenty of posts regarding the removal of drive and timing side sleeves from the crankcases, but how about removing the bearing itself from the crank?
Many thanks,
Malcolm
Main bearings
-
- Member
- Posts: 628
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
-
- Member
- Posts: 2159
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Re: Main bearings
If an extractor with legs won't go for lack of access to the race, a knife-puller is the easiest thing, I reckon.
- les ward
- Member
- Posts: 380
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WILTSHIRE UK
Re: Main bearings
I use an old chisel, which has a very shallow taper.