Oil sump bolts
-
- Posts: 8
- Joined: Mon Jun 14, 2021 10:36 pm
- Location: South Wales
Oil sump bolts
Hi, can anyone please tell me where I can get oil drain bolts from, if possible the magnetic one as well. AJS 14 1961. Thank you.
- Andy.S
- Member
- Posts: 152
- Joined: Thu Jun 30, 2016 5:50 pm
- Location: Northamptonshire UK
Re: Oil sump bolts
Hi
If you a referring to the two 3/8" BSP bolts on the bottom of the engine casing the club supply's them 022538 for the magnetic ones 022538Z for zinc plated or 022538S for a stainless steel one.
If you a referring to the two 3/8" BSP bolts on the bottom of the engine casing the club supply's them 022538 for the magnetic ones 022538Z for zinc plated or 022538S for a stainless steel one.
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Oil sump bolts
I think I have a one sitting in a box in the shed, will have a look.
Found this up to now.
Found this up to now.
You do not have the required permissions to view the files attached to this post.
Last edited by shifter on Fri Mar 18, 2022 5:06 pm, edited 2 times in total.
?
-
- Posts: 8
- Joined: Mon Jun 14, 2021 10:36 pm
- Location: South Wales
Re: Oil sump bolts
Hi, thank you for your replies. I picked a couple up today from the shop. Thank you for your help.
-
- Member
- Posts: 52
- Joined: Mon Jan 01, 1990 12:00 am
- Location: BEDFORDSHIRE UK
Re: Oil sump bolts
I don't believe that 022538 will work for the crankcase drain plug. The magnet protrudes too far from the thread. The Lightweight 042201 has the magnet flush with the end of the thread.
-
- Posts: 479
- Joined: Mon Jun 16, 2014 8:30 pm
- Location: NORTH
Re: Oil sump bolts
Just seen your post that's champion that you are sorted now, I will keep the one I have located for a spare
?