Is 428 the same size as 08B?
Cheers, Chris
Chain & Sprocket Sizes
- spookefoote1956
- Member
- Posts: 1838
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Chain & Sprocket Sizes
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
- dave16mct
- Member
- Posts: 3246
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Chain & Sprocket Sizes
No. Very close, ie both 1/2 X 5/16" but very slight differences in roller size. Whether it would make much difference I don't know. I used O8B sprockets with 428 chain for my paddock starter. This is ok but they were old, used primary chains and it only spins until the bike starts whereas yours spins continually and you would put new chains on. Instead of the 08B sprockets, you might get 428 sprocket blanks from someone like The Chain Man. Dave.
- spookefoote1956
- Member
- Posts: 1838
- Joined: Mon May 01, 2017 7:32 pm
- Location: Wales Innit
Re: Chain & Sprocket Sizes
Nice one Dave
Hail Joe Lucas ............ Prince of Darkness!
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
All my bikes are original........ to me!
"Creativity is your intelligence having fun" Albert Einstein
-
- Member
- Posts: 3367
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: Chain & Sprocket Sizes
The Chain Man (Jason?) was very helpful and prompt even though dealing with a tiny order.
JohnnyB
JohnnyB