DYNAMO BRUSH ACCESS
-
Blackcat
- Member
- Posts: 36
- Joined: Mon Nov 03, 2014 11:05 am
- Location: Berkshire UK
DYNAMO BRUSH ACCESS
Hi Guys, I have a 47 G80 with the original E3AR-A05-1 dynamo. I need to check the brushes but can't see how the end cap comes off. I have removed the 2 nuts and loosened the clamping strap but the cap won't budge, and I don't want to force it. I assume you have to take off the clutch side, cogs and chains ETC, to totally remove the dynamo, which is a pain.
You do not have the required permissions to view the files attached to this post.
I dunno man - I only just got here meself!