Hi, I am looking for the long air intake for a G80cs or typhoon that fits onto the carb and fasteners just under the seat. It looks like a long tube with rubber mount into carb.
I can see a part on the spares website titled
"AMC389/085A AIR INTAKE WITH GAUZE FILTER Long"
Does anyone know if that the right part or has one for sale or point me in right direction
Cheers Simon
Air intake tube for G80 CS
-
- Member
- Posts: 26
- Joined: Fri Nov 24, 2023 6:25 pm
- Location: Warwickshire
- Andy.S
- Member
- Posts: 152
- Joined: Thu Jun 30, 2016 5:50 pm
- Location: Northamptonshire UK
Re: Air intake tube for G80 CS
Hi Simon
That’s not the correct part number for what you need.
That screws on to a 389 carb as a trumpet with a mesh filter.
The part you need my be hard to come by.
That’s not the correct part number for what you need.
That screws on to a 389 carb as a trumpet with a mesh filter.
The part you need my be hard to come by.
-
- Member
- Posts: 1584
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Air intake tube for G80 CS
i use a 'Rubber Air Intake Tube 250CC JS250 ATV' on my 1961 G80CS
if you ebay description you will find it
its onto carburetor and air filter inlet , not genuine but does the job
if you ebay description you will find it
its onto carburetor and air filter inlet , not genuine but does the job
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 26
- Joined: Fri Nov 24, 2023 6:25 pm
- Location: Warwickshire
Re: Air intake tube for G80 CS
Thanks for the replies thus far, looks like it might be a tricky part to come by...
-
- Member
- Posts: 26
- Joined: Fri Nov 24, 2023 6:25 pm
- Location: Warwickshire
Re: Air intake tube for G80 CS
Hi folks please see picture of the part I am trying to find.
It's for the 500/600cc single cylinder scrambler models g80 CS, typhoon.
Any leads on where to find most welcome
It's for the 500/600cc single cylinder scrambler models g80 CS, typhoon.
Any leads on where to find most welcome
You do not have the required permissions to view the files attached to this post.