Hi all I’ve acquired a rear wheel for my project and thought all seals etc where there when I stripped it down (though bearings did not turn due to old grease) I’ve gone to reassemble it and I think a spacer is missing, looking at the parts list (attached) it’s either 010743 or 012436. I have 2 spacers that measure the same so presume they are 012436 as 2 are listed but one of these has the seal init? as these part numbers are on the same item in the picture are they the same? Though looking them up on the spares site it does list both.
Cheers
1950 rear wheel oil seal question
-
- Member
- Posts: 388
- Joined: Tue May 25, 2021 10:50 pm
- Location: Oxfordshire UK
1950 rear wheel oil seal question
You do not have the required permissions to view the files attached to this post.
Everyday’s a learning curve.
- dave16mct
- Member
- Posts: 3246
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 1950 rear wheel oil seal question
Look at the manual : http://archives.jampot.dk/book/Owners_m ... Manual.pdf
On pages 69 and 70 there are very good illustrations of all the parts.
Dave
On pages 69 and 70 there are very good illustrations of all the parts.
Dave
-
- Member
- Posts: 388
- Joined: Tue May 25, 2021 10:50 pm
- Location: Oxfordshire UK
Re: 1950 rear wheel oil seal question
Cheers Dave, yup did that but just wondered if they were the same size but have recently discovered there not so think alls good, well for now anyway
Neil
![Very Happy :rofl:](./images/smilies/rofl.gif)
Neil
Everyday’s a learning curve.