Magneto Timing

Information relating to the Matchless G80 or AJS Model 18 500cc Heavyweight.
Post Reply
kennyd
Member
Posts: 11
Joined: Fri Mar 29, 2024 9:08 pm
Location: Angus UK

Re: Magneto Timing

Post by kennyd »

Thanks Andy! just waiting on the Tippex to dry
Top
Allen_F
Member
Posts: 40
Joined: Mon May 14, 2018 9:56 am
Location: Queensland AUSTRALIA

Re: Magneto Timing

Post by Allen_F »

I have had this experience of a slipping sprocket. I discovered that the retaining nut was bottoming out on the lip at the end of the tapered shaft, preventing the sprocket from being fastened. I drilled out the retaining nut so as to allow the outer edge of the nut to press the sprocket onto the taper.
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “G80 / Model 18”