Number plate size for a G2 CSR???

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
paul miles
Posts: 24
Joined: Mon Apr 28, 2008 12:44 pm
Location: ESSEX UK

Number plate size for a G2 CSR???

Post by paul miles »

Hi All
Can anyone tell me the correct size number plate for the above machine????
Ive looked at some on line and they appear to be 7" x 6" which seems too small for the mount at the rear. I know you can have them made to size, but what size should it be???
Regards
Paul M
lawrence
Posts: 2453
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Number plate size for a G2 CSR???

Post by lawrence »

Hi Paul
Does this not take the same (shaped) rear plate as the other CSRs?

If it does, Jampot Spares sell them.
paul miles
Posts: 24
Joined: Mon Apr 28, 2008 12:44 pm
Location: ESSEX UK

Number plate size for a G2 CSR???

Post by paul miles »

Hi Lawrence,
I never gave Jampot spares a thought, do they need all the legal stuff to do them or are they what they call show plates??? I dont mind Show Plates as long as they are good quality.
Thanks for your interest
regards
Paul
lawrence
Posts: 2453
Joined: Mon Jan 01, 2001 12:00 am
Location: NORTHAMPTONSHIRE UK

Number plate size for a G2 CSR???

Post by lawrence »

Hi Paul
They don't make up numbered plates.

I meant the shaped number plate (pressed steel) which you then paint and apply the self-adhesive numbers to. I have just checked Jampot Spares and they seem to have sold out of csr ones (if it is the same) Sorry.Edited by - lawrence on 08 Jun 2008 9:54:56 PM
paul miles
Posts: 24
Joined: Mon Apr 28, 2008 12:44 pm
Location: ESSEX UK

Number plate size for a G2 CSR???

Post by paul miles »

Hi Lawrence,
Thanks for your help,
Regards
Paul M
Locked