G14 Lightweight -Fork crown stem threads

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
cbranni
Member
Posts: 1439
Joined: Sat Oct 09, 2010 9:17 pm
Location: ABERTAWE UK

G14 Lightweight -Fork crown stem threads

Post by cbranni »

Just be careful..............the chaser can dig in, so keep rest as close to stem as posible, put an old wooden file handle on chaser.

Colin
only dead fish go with the flow
itma
Posts: 7721
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

G14 Lightweight -Fork crown stem threads

Post by itma »

If you can get the nut and the yoke to me I will sort it as long as I have the right taps and die.
can you measure the width of the stem?
David Paterson
Posts: 11
Joined: Sat Sep 11, 2010 5:23 pm
Location: ESSEX UK

G14 Lightweight -Fork crown stem threads

Post by David Paterson »

David Paterson
Posts: 11
Joined: Sat Sep 11, 2010 5:23 pm
Location: ESSEX UK

G14 Lightweight -Fork crown stem threads

Post by David Paterson »

Many thanks for your advice and kind offer. I have taken parts to local farmer who decided it was too delicate for him but he has a toolmaker contact who will sort it out.

We ended up discussing old bikes as he and his father used to race AJS/Matchless so it was a very interesting visit. I have every confidence it will be sorted but I'll let you know outcome

David
Locked