Stop light switch

kerabo · Post by **kerabo** » Wed Jul 20, 2011 10:32 pm

Is there a picture I can view showing the stop light switch . My bike had it fixed to the rear footrest hanger and now I am fitting footrests I will need to move it. 1955 350 MS

Regards Ken

itma · Post by **itma** » Wed Jul 20, 2011 10:48 pm

fits on on of these

http://i67.photobucket.com/albums/h314/ ... racket.jpg

clive · Post by **clive** » Thu Jul 21, 2011 11:54 pm

I've go the cheapo plastic one you see at all the jumbles mounted on one of the thinner tubes, of course it is probably not original but it does the jobEdited by - clive on 21 Jul 2011 10:55:24 PM

bigwol · Post by **bigwol** » Sat Jul 23, 2011 5:34 pm

Just a thought, has anyone fitted a stop light switch to the front brake

itma · Post by **itma** » Sat Jul 23, 2011 6:49 pm

yes, easy enough if you can make your own cables, use one of those as fitted to BSA Triumph late 60's/ early 70's or modify a cable from one of those makes.

en7jos · Post by **en7jos** » Mon Aug 01, 2011 3:39 am

quote:
Just a thought, has anyone fitted a stop light switch to the front brake

Hi Bigwol,

I've just fitted a front brake switch to my bike as it was mandatory to get it registered here in Hong Kong. There's a 'how to' guide on my blog that might be useful for you:

Fitting brake lights to a Matchless G3LS

Regards, James

kerabo · Post by **kerabo** » Mon Aug 01, 2011 8:44 am

Top marks that man, What a clear well laid out reply.

Ken

itma · Post by **itma** » Mon Aug 01, 2011 12:49 pm

same as wot I said but with a lot more words