Page 1 of 1

Quick question ...

Posted: Wed Aug 15, 2012 8:02 pm
by joker7
Hi,
Been doing some work on the bike, need to pick the collective brain :)

What spark plugs is every one using ?
Valve clearance the haynes manual is a vague ?

Also need to find a spring for the Rear chain tensioner, ideas before I go to AJS

Whoops some what big headed of me to think you all know what bike it is :) 125 EOS

Chris

Quick question ...

Posted: Thu Aug 16, 2012 6:58 pm
by NoodleHead
Hi joker7. Standard plugs are NGK
cr7hsa/cr7hs or a better bet would be upgraded type NGK cr7hix.
Valve clearances are: inlet 0.08mm (003") exhaust 0.15mm (006")

Regal Raptor DD125E-5 EOS

Quick question ...

Posted: Thu Aug 16, 2012 7:04 pm
by NoodleHead
Spring is almost certainly specific for bike. AJS is your best call.