I am trying to refit the rear brake pedal. One end of the spring appears to fit in the hole at the back of the pedal, but where
does the other end fit?
Rear brake pedal spring
-
- Member
- Posts: 27
- Joined: Mon Aug 01, 2011 5:06 pm
- Location: KENT UK
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: Rear brake pedal spring
I have seen what is best described as a tab washer, the tab being at right angles to the washer, the washer fits between the frame and the shaft. The tab picks up on the hook of the spring, to tension it nip up the nuts and tap the tab around to tension the spring. The 350s have a shaft but the 250s have a sq rod with a round coller that the brake lever swivels on, I hope all that makes sense.
Colin
Colin
only dead fish go with the flow
-
- Member
- Posts: 27
- Joined: Mon Aug 01, 2011 5:06 pm
- Location: KENT UK
Re: Rear brake pedal spring
Thanks I couldnt see how the washer would hold the spring but it now makes sense.