Page 1 of 1
exhaust
Posted: Fri Oct 17, 2014 2:40 pm
by Martyn
Can anyone confirm if the high level Norton P11 exhaust will fit on a 65 Matchless G15cs? I would like to use these purely from an aesthetic point of view. If not can anyone point me in the right direction for the correct exhausts.
many thanks
Martyn
Re: exhaust
Posted: Thu Oct 23, 2014 2:52 am
by BillTS3
Hi Martyn,
I have a G15CS and a 750 Ranger. The P11 exhaust would physically fit on a G15CS, but you would have to fabricate your own hangers for the silencers due to the different frames. Though the frames are different between the two bikes, the widths are similar, meaning the silencers will clear the toolbox and oil tank.
Bill T
Re: exhaust
Posted: Thu Oct 23, 2014 9:29 pm
by Martyn
Bill
As before, many thanks for the information. I will try and get a couple of pictures of the bike on here in the next 3-4 weeks. It is still away off being finished but it is getting there. I guess it is now going to be spring for the first ride.
Regards
Martyn