Page 2 of 2
Re: 1966 G2 CSR TRAUMA
Posted: Tue Jun 20, 2017 7:56 am
by clanger9
Thanks Ozmadman - the "1965 Models Only" section at the bottom confirms that the late CSRs did have the ratios shown in the F Neill manual.
I wonder why those gears aren't identified in the 1965/66 parts list?
Re: 1966 G2 CSR TRAUMA
Posted: Mon Jun 26, 2017 9:35 pm
by brentor
Hi I have a 196 250 CSR, seems all your questions have been answered. I have a problem with clutch and have measured the push rod at 10 1/4" Can you measure yours and see if it is the same length as I feel it coul be too long
Phil Taylor
Re: 1966 G2 CSR TRAUMA
Posted: Mon Jun 26, 2017 10:29 pm
by clanger9
The rod in my spare gearbox is 9.9"
I haven't tested it, so I can't confirm if this is the correct length.
Re: 1966 G2 CSR TRAUMA
Posted: Tue Aug 22, 2017 11:49 am
by clanger9
Did you find out the correct length of the clutch rod?
From what, I've been able to find out, there appear to be two clutch rods:
042208 9.9" long, fitted to G2 or Model 14 up to 1961
042725 10.1" long, fitted to all other models (CS, G5, Model 8, CSR, G2 & Model 14 1962-)
Hopefully the above is correct. Can anyone confirm?