Page 1 of 4
Timing Gear Extractor
Posted: Sat Dec 23, 2017 10:15 am
by DanSmith
Help!! Does anyone in the Hants area have a Timing Gear Extractor I can borrow please??
Or know where I can Buy or hire?
Thanks Dan
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 11:35 am
by clive
I think Dan is a recently joined club member but this is not showing and his posts are having to be authorised by a moderator. If I am correct on this Dan, please email Eamonn the webmaster to get your log in and membership linked (
webmaster@jampot.com) with the details.
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 11:58 am
by DanSmith
Have sent Eamonn an email. Thanks Clive
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 12:16 pm
by ajscomboman
Well in that case being a member I have one you can borrow but not being able to drive due to a foot op you'll have to collect it from Southampton.
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 1:09 pm
by clive
clive wrote:I think Dan is a recently joined club member but this is not showing and his posts are having to be authorised by a moderator. If I am correct on this Dan, please email Eamonn the webmaster to get your log in and membership linked (
webmaster@jampot.com) with the details.
Thought that might help the offers. I would be prepared to post one to borrow after Xmas as I am West London based.
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 7:30 pm
by DanSmith
Clive, tried signing in as Eamonn suggested but it would not accept it, cannot re register as username/email already used.
ajscomboman, thanks for the offer... very grateful. We can come down to get it.... if fact its 90% stripped so could put it in car and do the job in boot..... what day/time would suit....would Wednesday morning be ok?
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 7:43 pm
by DanSmith
Clive Eamonn has fixed it!!
Re: Timing Gear Extractor
Posted: Sat Dec 23, 2017 9:05 pm
by ajscomboman
DanSmith wrote:Clive, tried signing in as Eamonn suggested but it would not accept it, cannot re register as username/email already used.
ajscomboman, thanks for the offer... very grateful. We can come down to get it.... if fact its 90% stripped so could put it in car and do the job in boot..... what day/time would suit....would Wednesday morning be ok?
Yep that'd be fine, should only be a couple of minutes to pull the gear off.
I'll send address details via PM.
Re: Timing Gear Extractor
Posted: Wed Dec 27, 2017 3:29 pm
by G15 Roy
Yep that'd be fine, should only be a couple of minutes to pull the gear off.
I'll send address details via PM.[/quote]
How did it all go just a quick tug and it was off i bet he was pleased.
Re: Timing Gear Extractor
Posted: Wed Dec 27, 2017 4:27 pm
by ajscomboman
G15 Roy wrote:Yep that'd be fine, should only be a couple of minutes to pull the gear off.
I'll send address details via PM.
How did it all go just a quick tug and it was off i bet he was pleased.[/quote]
You know full well how it didn't go!!!!! I've used the puller on several gears but this bugger is really on there! So bloody tight it pulled the tang of the puller like a ring pull on a drinks can. Heated the gear up and still bugger all happened. I'll get the puller welded and may have a look at getting some pullers made as they're not available anywhere.