Page 1 of 1
G3ls valve guides
Posted: Tue May 08, 2018 1:05 pm
by allanmg9
Hi again , has anybody found a solution to g3ls inlet and exhaust valve guides being too loose, is it possible to purchase oversized replacements . I guess some of you must have come across this and found a cure , here's hoping !
Allan
Re: G3ls valve guides
Posted: Tue May 08, 2018 1:14 pm
by alanengineer
I think Nortons have oversized valve guides available. They are not to difficult to make, i have done a few for my Norton Friends. Over sized oversize
Re: G3ls valve guides
Posted: Tue May 08, 2018 5:12 pm
by SPRIDDLER
Russell Motors used to supply them and maybe they still can. Give Les a call. (He doesn't use email).
http://www.russellmotors.co.uk/
Re: G3ls valve guides
Posted: Tue May 08, 2018 9:54 pm
by 56G80S
T&L Engineering made a new oversize exhaust guide for me and machined the head to fit and fitted it; not to mention puttng in new seat to replace the turning stuffed up one. And stak of other work (like the collapsed head bolt pillars) and re-ling the barrel to standard etc.
It was a good job and now about 1,000 miles since and compression and performance improving as all bed in together.
I have no business or other relationship, just a satisfied cutomer.
Johnny B