Re: Matchless G3L - Teledraulic Fork Spacing Query
Posted: Tue Dec 04, 2018 9:20 am
External OD of both seals are the same so are interchangeable. The bushings are the same only the ID's are different.Mick D wrote:Thanks John
But as the bike in question should be fitted with 1 - 1/8" forks I don't think an 1 - 1/4" seal would fit into the slider let alone the smaller diameter recess in the slider extension.
PHenry
Are you trying to install a genuine AMC oil seal or have you measured the OD, (incorrectly, if the seal you have fits into the slider extension), and ID and source a seal of those dimensions?
Regards Mick