Page 1 of 1

G2 1961 new purchase

Posted: Sun Jan 27, 2019 9:52 pm
by Richard Hyatt
hi all,

just purchased a(what I believe to be) 1961 G2. Engine No 61/G2 10529 and Frame No 15174.

just making lists of what I need for it - but I know I need a kickstart lever and off side footrest and the cover that goes over the gearbox adjusters for sure. Any suggestions please for these parts would be welcome.

going to convert to 12volts , so will have the various 6 volt parts for sale eventually if anyone needs them.

look forward to speaking(metaphorically) to lots of knowledgeable people on this forum. Thank you in advance.

Richard

Re: G2 1961 new purchase

Posted: Sun Jan 27, 2019 10:59 pm
by clive
Hi Richard welcome to the forum and I hope you find what you are needing. Just a word about our forum rules. You are welcome to advertise for wanted parts or to make parts available to others but not in our general forum pages. Please use the adverts section free for full members £5 for others.
Regards Clive Adverts Editor

Re: G2 1961 new purchase

Posted: Mon Jan 28, 2019 12:39 am
by Ozmadman
And just to add... you have limited access time on the forum as a guest so it would be advantageous to join the club as a full member. A digital membership (12 digital mags a year) plus full access to the forum is only £22 a year.

Re: G2 1961 new purchase

Posted: Mon Jan 28, 2019 7:41 am
by shifter
Hello & welcome Richard as prior posts have said join the club, as the benefits of joining are truly beneficial in terms of the help and advice/spares/ and so on especially when starting a new project.

shifter

Re: G2 1961 new purchase

Posted: Mon Jan 28, 2019 8:47 am
by Richard Hyatt
hi all,
thank you - I've now joined No 27883

so look forward to trawling and finding the bits needed

we'll be dating the machine etc so be in contact ref DVLA etc

Richard

Re: G2 1961 new purchase

Posted: Mon Jan 28, 2019 10:07 am
by SPRIDDLER
Richard Hyatt wrote: just making lists of what I need for it - but I know I need a kickstart lever ...........
Welcome Richard.
There was a recent thread on this forum ref the k/start which may be of interest, if you haven't already seen it. I understand that they not only differ model to model but are also very scarce. Have a look here:

http://www.jampot.com/forum/viewtopic.php?f=15&t=24245