Page 1 of 1

gearchange ratchet

Posted: Sun Aug 04, 2019 4:19 pm
by red_dog49
hi, have continually had gearchange problems, so got the gearbox outer case off and find I have part number 041284 fitted, according
to my info it should be 041283(gearchange ratchet), cannot find any reference to 041284 anywhere. there are none I can find anywhere.
can anyone confirm or deny this part, does it look right ?
regards
Rob.

Re: gearchange ratchet

Posted: Sun Aug 04, 2019 6:39 pm
by Ozmadman
Looks right, sometimes there is a casting number on the item which is one digit different to the actual part number. What is happening with the gear changing?

Re: gearchange ratchet

Posted: Sun Aug 04, 2019 7:07 pm
by shifter
I have one the same as this spare one in my model 8 and the gear change works champion
shifter

Re: gearchange ratchet

Posted: Sun Aug 04, 2019 9:29 pm
by red_dog49
hi, the gear selector travel gets longer until you can only select 1st and 2nd, just a thought, looking at it which way should the boss face ?.
Rob.

Re: gearchange ratchet

Posted: Mon Aug 12, 2019 7:34 pm
by clanger9
Your part looks correct. Here are a couple of photos of my spare one:
IMG_0583.jpg
IMG_0584.jpg
Is the big return spring OK (041328)? They can crack and go weak. Here's a cracked one:
IMG_0585.jpg

Re: gearchange ratchet

Posted: Fri Aug 16, 2019 12:21 pm
by red_dog49
hi, so I rebuilt the gearbox outer section and the gear change is a lot better and can get all gears ,if or when it happens again will have to try and renew some
of the relative parts if I can find them.
regards
Rob.