Mag timing gear wheel.
- Rosy
- Posts: 173
- Joined: Sat Sep 14, 2019 5:50 pm
- Location: Bristol & East Devon
Mag timing gear wheel.
I naively removed the coil ignition on my G9 and fitted the new magneto I bought, thinking at the time I bought the mag that the distributer timing gear wheel would fit the mag, but it is totally different. I went ahead thinking I could just buy a K2F mag gear wheel but so far with no luck, I've tried most magneto suppliers and breakers. So I am wondering if any other gear wheel will fit from a Triumph/BSA etc? I have put an advert on this site for one hoping someone on here might have one they might part with, or it may be a case of refitting the coil ignition. I did wonder why the bike was fitted with coil ign, and not a mag now I know.
-
- Member
- Posts: 3542
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
Re: Mag timing gear wheel.
There where two for sale at Kempton on Saturday you may have to get to the January event and hope there are some left.
Roy
- dave16mct
- Member
- Posts: 3279
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Mag timing gear wheel.
I think I've got one. I'll have a look tomorrow and let you know.
Dave.
Dave.
- Rosy
- Posts: 173
- Joined: Sat Sep 14, 2019 5:50 pm
- Location: Bristol & East Devon
Re: Mag timing gear wheel.
Fingers crosseddave16mct wrote:I think I've got one. I'll have a look tomorrow and let you know.
Dave.
- dave16mct
- Member
- Posts: 3279
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Mag timing gear wheel.
I've found the gear. PM'd you.
Cheers Dave.
Cheers Dave.