AJS & Matchless Owners Club

I need some bolts to attach the left and right cases to the crankcase. (14CSR 1963) - can anyone confirm the type i need? They look to be 1/4in but are they Whitworth, BSF or even 0BA? (or are these the same thing?) I'm confused. Many thanks for any help.

1/4 " or 5/16 " you should be able to discover which. I am sure will be 26 TPI Cycle thread. You should also be able to measure how long. The thread projecting each end needing to take a nut, washer the 2/3 threads poking out from the nut. Perhaps do this by poking something through with a nut and washer hanging on each end to discover the length.

Club spares do a set for either side to suit lightweights

http://www.amoc-parts.com/store/comersu ... duct=22349

http://www.amoc-parts.com/store/comersu ... duct=22380

Colin

Thanks guys. I see the club are out of stock at the mo but i should have enough info to get some.

Sorry I didn't notice they were out of stock.

cbranni wrote:Sorry I didn't notice they were out of stock.

Just not enough time or manpower to get them sourced or re-stocked, especially as the samples were sold yrs ago!

Now if any one has the time and got a set for use as samples we'd happily pay to have them supplied and back in stock.

Hi Rob i will bring an old set with me on Sunday to use as a pattern.

Steve